Español
Português PT
English
Voltage-type sensors with Vin = 1.8V / 2.5V / 3.3V / 5.0V, required current ≤ 100mA, sensor output signal (Vout) ≤ sensor input voltage (Vin)
Voltage Interface Node
Voltage-type sensors with Vin = 1.8V / 2.5V / 3.3V / 5.0V, required current ≤ 100mA, sensor output signal (Vout) ≤ sensor input voltage (Vin)
Voltage Interface Node
The WiSenMeshWAN® system provides dynamic and autonomous wireless data acquisition from geotechnical sensors using cutting-edge technology. Automated measurement of geotechnical sensors using long-range wireless radio nodes and a SmartGateway allows you to focus on more demanding tasks instead of manual data acquisition and logging.
WiSenMeshWAN® sensor nodes act as both transmitters and receivers, forming a self-organizing dynamic radio mesh network that sends data to a SmartGateway. Users have full remote control of the system through direct, triggered, or scheduled changes, enabling dynamic measurements and report generation.
|
6C01 Type – WiSenMeshWAN® Voltage Interface Node |
|
|---|---|
| Basic Features | |
| Battery Power | 1 x 3.6V Lithium primary D-Cell (ER34615) |
| Accuracy Stop Voltage | 2.7VDC |
| Mesh Stop Voltage | 2.1VDC |
| Battery Connection | Standard aluminium battery holder |
| Working Current (DC) | Max. 210mA |
| Local Storage | Min. 450 messages during meshing |
| Dimensions (L x W x H) | Interface Node: 100 x 100 x 60 mm |
| Weight | 0.6 kg |
| External Sensor Size & Weight | Depends on the connected sensor (external cable ≤ 1.0 m) |
| Cable Gland | 1 x EMC-CMA12 for external sensor connection |
| Wiring Connection | Spring-type terminal |
| Primary Sensor | |
Sensor Type: Signal output range (0 to Vcc_Out) / Power input voltage (Vcc_Out) @ max. 100mA
Note: External sensor power-on time: 1 second before sampling. Confirm sensor stabilization time before use. |
|
| Accuracy | 0.05% F.S. |
| Resolution | 0.18 mV |
| Standard System Parameters | |
| Temperature | Range: -40 to 85°C; Accuracy: ±1°C; Resolution: 0.1°C |
| Voltage | Accuracy: ±0.1V |
| WSN Interface | |
| Mesh Wireless Interface | WiSenMeshWAN® Protocol |
| Sampling Range Selection | |
The “Vcc_Out Hardware Switch” is used to:
Example: For model 6C01, set Vcc_Out to 2.5V to power an EC-5 soil moisture sensor and allow the node to sample between 0 and 2.5V. Note: For other sensors, consult specifications before configuring. |
|
| Vcc_Out Switch Settings | |
| Switch Position | Output Voltage (Vcc_Out) |
| 0 (default) | 1.8V (default) |
| 1 | 2.5V |
| 2 | 3.3V |
| 3 | 5.0V |
The sensors are plug and play, working straight out of the box with a self-configuring radio network. Multiple interface options enable integration with third-party sensors from leading geotechnical manufacturers (analog / digital / vibrating wire).
Designed for up to 10 years of maintenance-free operation, the units are IP65 rated or higher, with internal power and radio. Their robust industrial housings allow flexible installation to meet the needs of your monitoring projects.
You might also like
Product image thumbs bottom
Product image thumbs left
Product image thumbs right
Product image no thumbs
Product image no thumbs center
Product image no thumbs fullwidth
Product image gallery
Duplicate of Product image thumbs bottom
detail2833693304
![detail2833693304]()
Duplicate of detail2833693304
![Duplicate of detail2833693304]()
productos nuevo prueba
![productos nuevo prueba]()