Español
Português PT
English
The single-channel node is a wireless data logger that makes geotechnical probes adapt to LoRaWAN wireless communication. Each node supports a geotechnical probe and can host an additional NTC thermistor.
The single-channel node can be configured on the Move Solutions cloud platform: you can set different parameters remotely and monitor the collected data at any time.
This new node comes with longer battery life, a wider range of compatible probes, and a new acquisition mode activated by an accelerometer.
Nodo monocanal
The single-channel node is a wireless data logger that makes geotechnical probes adapt to LoRaWAN wireless communication. Each node supports a geotechnical probe and can host an additional NTC thermistor.
The single-channel node can be configured on the Move Solutions cloud platform: you can set different parameters remotely and monitor the collected data at any time.
This new node comes with longer battery life, a wider range of compatible probes, and a new acquisition mode activated by an accelerometer.
Single Channel Node | Move Solutions
8 different models to ensure maximum compatibility
The single-channel node is available in 8 models, each suitable for a different type of probe interface. Check this table to choose the models that best meet your needs.
Interface |
Product Code |
| 4-20mA | DECKSCN-MA0 |
| mV/V | DECKSCN-MVV |
| Voltage (5 V) | DECKSCN-V05 |
| Voltage (12 V) | DECKSCN-V12 |
| Vibrating Wire | DECKSCN-VBW |
| Pt100-Pt1000 | DECKSCN-PT1 |
| NTC | DECKSCN-NTC |
| Potentiometer | DECKSCN-POT |
Applications of the Move Solutions Single Channel Node
 |
 |
 |
 |
Geoenvironmental MonitoringAnalyze ground displacement (settlement or lateral movement) and soil stress-strain state with inclinometer probes and vibrating wires. You can also monitor all external atmospheric agents such as wind direction and speed, rainfall, humidity, and temperature. |
Hydrological ControlWith sensors like piezometers, you can monitor the level of groundwater and surface water and correlate it with soil subsidence values. |
Structural MonitoringUsing crack meters allows you to keep a dangerous crack pattern under control. You can also monitor the stress-strain state of structural elements using strain gauges and correlate the data with temperature. |
Geotechnical SupervisionBy inserting load and pressure cells into the ground, you can monitor both the pressures exerted by the soil and the distribution of loads on the foundations and their deformations. |
The single-channel node is a wireless data logger that adapts geotechnical probes to LoRaWAN wireless communication. Each node supports one geotechnical probe and can host an additional NTC thermistor. The single-channel node can be configured on our Move cloud platform: you can set different parameters remotely and monitor the collected data at any time. This new node comes with longer battery life, a wider range of compatible probes, and a new acquisition mode triggered by an accelerometer.
Key parameters:
- LoRaWAN wireless communication for wired geotechnical sensors
- Built-in long-life battery
- Acquisition cadence to be set remotely
- Two types of acquisition methods: programmed and triggered by unusual events
- Auxiliary NTC reading features (except DECKSCN-PT1 and DECKSCN-NTC nodes)
- Improved accuracy
- Internal antenna
- Small package (130×171.2×62 mm)
- Deeply integrated with Move Solutions Cloud Platform
- Easy installation with options suitable for every structure
- Waterproof rating IP67
Some of the geotechnical probes compatible with the single-channel node:
- Crack meter
- Strain gauges
- Temperature probes
- Inclinometer probes
- Pressure cell
- Load cell
- Hygrometer
- Piezometer
- Anemometer
- Rain gauge
- Radar level probe
Easy installation of the Move wireless monitoring system
The installation of an entire system of wireless sensors on site is quick and easy: simply mount each device with at least two screws on the structure you want to monitor and power the LoRaWAN gateway. You can configure the entire system remotely, before, during, or after installation, using your laptop or tablet. After mounting and configuring, the Move wireless monitoring system will start measuring, and you can begin monitoring remotely.
Operation of the Move wireless monitoring system
The wireless sensor system automatically communicates measurement data via LoRaWAN with the on-site gateway, which in turn sends the received data via 4G or LTE to online servers. The Move Cloud Platform is the cloud-based web tool that allows you to access, view, and export your measurement data and configure the settings of the entire sensor system. You can access the Move Cloud Platform 24/7 from any location or device worldwide. One of the main advantages of the Move Cloud Platform is that it offers remote access to measurement data and allows for the remote configuration of all installed sensors. This saves time and labor. Additionally, you can analyze measurement data using processing algorithms included in the service. Perform calculations, correlations, and complex analyses automatically and effortlessly. With just a button click, you can export measurement data in CSV format. You can also easily set alerts for multiple recipients who will receive threshold crossing notifications via email.
- Easily install the entire system on the structure without the need for wiring.
- Quickly and remotely configure all wireless sensors.
- View real-time measurement data wherever you are, on any device, 24/7.
- Process collected data using implemented algorithms.
- Constantly monitor the operating status and signal quality of the system remotely.
- Customize your alarm notifications and receive overload notifications via email.
- Optionally, you can integrate the data into your platform via an MQTT bridge, FTP, or API calls.
You might also like
Product image thumbs bottom
Product image thumbs left
Product image thumbs right
Product image no thumbs
Product image no thumbs center
Product image no thumbs fullwidth
Product image gallery
Duplicate of Product image thumbs bottom
detail2833693304
![detail2833693304]()
Duplicate of detail2833693304
![Duplicate of detail2833693304]()
productos nuevo prueba
![productos nuevo prueba]()